Bookmark and Share

How to Build a Raised Bed

Follow these instructions to build your own raised garden.

By Elizabeth Millard

Living in a quaint Minneapolis neighborhood has its charms: chummy potlucks, Craftsman bungalows, and plenty of farmers markets, just to name a few. But when it comes to growing crops, challenges abound. Although I haven't had my backyard soil tested, some of my neighbors have, and the results aren't great. Like many urban areas, heavy metal and arsenic levels present here would turn edible gardening into a health gamble. So, I decided to make the most of my small space and create some raised beds, aiming for high efficiency when it comes to watering. Here are the steps that took me from backyard to mini-farm:

Building equipment: When choosing lumber, keep in mind that you'll need what's appropriate for growing food (if you are) and surviving multiple seasons of use. Here's what I used:

  • Cedar planks
  • Smaller wood pieces, if using as braces
  • Cordless drill
  • Circular saw or table saw
  • Tape measure
  • Wood screws
  • Corrugated, perforated drain pipe
  • Thick black plastic sheeting
  • Fabric/greenhouse staples

If you want to go the extra mile and also create a hoop structure over the beds, add these:

  • 1/2-inch PVC pipe (quantity depends on project, we did three)
  • 1-inch PVC pipe to act as holders for the hoops
  • 1 1/4-inch short PVC pipe for watering
  • PVC galvanized brackets

  • Step 1
  • Step 1

    Figure out exactly where you want the raised bed, and how big it's going to be. Take your time on this one because, once it’s built and filled with soil, it will be tough to move. Assemble your tools, and go shopping for the stuff you don't have lying around, like the corrugated pipe or PVC brackets (and if you have those types of items on hand, please move into the house next to me).

    Also, determine if you want an irrigation system at the bottom — we wanted to cover the existing yard space with plastic and put in pipes so that plants could get water from the roots as well as from the soil surface. If you want raised beds without this system, you get to skip the irrigation strategies, and your beds will be shorter in depth than ours, as a result.

  • Step 2
  • Step 2

    Lay out your bed in a rough configuration of where you want them. Our beds are 10 feet long and 4 feet wide. We chose that size because we wanted to be able to plant and harvest from both sides. The depth is 10 inches, to accommodate the irrigation pipes and 6 inches of root space. We used four 2x6 planks and four 2x4 planks, and then pieced them together with the shorter brackets.

  • Step 3
  • Step 3

    Because we wanted to hoop the beds for colder days (this is Minnesota, after all), and cut down on direct sun during warmer days, we went with a simple PVC structure. Cut down your long, largest pipe into smaller sections, and then secure them with galvanized brackets. These will act as holders for each hoop segment.

  • Step 4
  • Step 4

    Drill a guide hole first and then use the screws. Whenever we tried to skip this step, our cordless drill expressed its unhappiness by stripping the screw heads. Secure the bed together with screws. This tends to make the structure sturdier than using nails.

  • Step 5
  • Step 5

    Take your smaller PVC pipe, insert one end into the PVC bracketing, and then bend the pipe over into the bracket on the other side. Be sure to have a very strong grip on the pipe because it can snap back on you if you let it go. If this happens, believe me, the bruise can be very colorful.

  • Thumbnail
  • Step 6

    At this point, you can choose to fill the raised bed with soil and congratulate yourself for an expert DIY job. Or, if you're going for the irrigation system, lay down the thick plastic sheeting inside the bed. This eliminates weeds from growing into your new bed, and also creates an effective water/oxygen reservoir. Drape the sheeting over the sides of the bed by a few inches and secure the corner and sides on the inside with fabric/greenhouse staples for a tighter fit.

  • Step 7
  • Step 7

    Put down a thin layer of soil. This will help to hold the drain tubes into place.

  • Thumbnail
  • Step 8

    Cut the corrugated, perforated plastic drain pipe so that four sections fit inside the beds, on top of the sheeting. We used a quirky power tool, a Black & Decker Alligator, and it worked very well, but you could also do the job with a handsaw, circular saw or table saw. Drill or cut a hole in one of the sections and put a 1 1/4-inch PVC tube halfway into the pipe. It should be tall enough for convenient watering, sticking out a few inches above the planting surface. This will allow you to fill the pipe once the soil is in place.

  • Thumbnail
  • Step 9

    Fill the beds with soil and smooth it out evenly over the drain tubes and the bed. Stand back and admire your work — invite a few neighbors over to marvel at the precision, maybe. Then, do some planting.

 Raised bed


Step 10

Water seeds from the top, but also make sure to regularly fill the drain tube. Although it might seem strange that you only fill one tube to get irrigation to the entire bed, it really does work. To keep out bugs and protect plants from chilly nights, we put re-lay fabric/row covering over the hoops and secured them with small clamps — potato-chip-bag clips work sometimes, too, or binder clips.

That's it ... the raised beds look good, and make the most of our small backyard. Plus, with the irrigation system, they tend to use less water than our other plants. Happy building!


Give us your opinion on How to Build a Raised Bed.
Submit Comment »
Nice job!
Dante, Hyde Park, MA
Posted: 5/26/2015 3:47:03 AM
This method is for a cold place and the plastic is used to keep as much warmth as possible.The type of bugs there are different to Florida. Used to live in Sarasota and despite all my efforts with mesh nets etc my stuff got eaten.Its totally different in colder places.
Judith, Fort Lauderdale, FL
Posted: 2/7/2015 7:07:59 PM
Okay, just a question here really...if you put a mesh over the beds to keep out bugs, won't this keep out your pollenators as well such as bees and butterflies? That being said, how is that not also a problem if the beds are covered with plastic to make little greenhouses and extend the growing season as the weather is generally too cold for bees and butterflies and they couldn't get to the plants anyway?
Kitty, St Petersburg, FL
Posted: 2/7/2015 1:17:25 AM
Hi everyone. We live on Colorado and did this project two years ago. It was great. We added a long "rib" from end to end and tied it to the short ribs at the top to give us better ability to withstand late/early snow for our hoop structure. We also used 2 to 3 inches of river gravel with two layers of fablric instead of drain pipes and that seems to work well. The 4 feet wide bed to allow access to both sides is a good idea we did 5 feet wide on a couple and it is a real stretch to reach the middle without putting a foot or heavy hand into the bed. 4 feet is just right. On our northernmost bed for cucumber and peas we put a piece of fence right down the middle for them to climb and not shade the other beds. Happy Gardening everyone. Crowley Garden Farm and Rescue Dog Emporium!
Crawdad, broomfield, CO
Posted: 5/8/2014 2:31:23 AM

Featured Product

Popular Kitchen: Canning & Preserving | More Info »

Related Articles

Advertiser Links

Top Products
Gold Standard

*Content generated by our loyal visitors, which includes comments and club postings, is free of constraints from our editors’ red pens, and therefore not governed by I-5 Publishing, LLC’s Gold Standard Quality Content, but instead allowed to follow the free form expression necessary for quick, inspired and spontaneous communication.

Would you like to receive Farmer in the City Newsletters?X Close Window
Please provide us with your email address in order to access this valuable sustainable-living content.
Fields marked with an asterisk * are required.
* Are you at least 13 years old?
* First Name:
* Last Name:
* Email:
* City:
* State/Province:
* Enter the code shown:

  Yes, I would like to get valuable information from UrbanFarmOnline.com.
In order to opt-out of our newsletters, you can click on the "unsubscribe" link in the bottom of the newsletter.
  Yes, I would like to get valuable information from UrbanFarmOnline.com partners.